Research-based shortlist, not a verified-fit list. Confirm your model year, body style, trim and seat layout before buying.
This guide builds on our general guide to choosing the best kennel for your vehicle. Start there for the overall approach, or change vehicles with the selector below.
Start with your Tesla Model Y’s layout
The Model Y has a liftgate, but its rear glass and closing hatch still limit the upper corners of a kennel. Measure usable floor space and the height available at the back of the installed crate separately. Do not count underfloor storage or the front trunk as occupied dog space.
Keep the underfloor compartments separate from the kennel footprint. Decide which charging or roadside supplies you need during a trip and move them to a reachable place if the installed kennel would prevent lifting the floor panel. Total advertised storage combines spaces that a rigid occupied enclosure cannot use.
A rear-facing kennel should be checked at full height with the liftgate closed, not only from the open-hatch view. Do not assume an angled kennel profile follows the Model Y’s glass. Photograph the clearance around the upper corners and repeat the test if you change the cargo mat, seat arrangement or vehicle generation.
The checks that matter here
- Exact generation and seating layout
- Closed liftgate and glass clearance
- Flat load surface without counting storage wells
Kennels we would compare for the Tesla Model Y
A lower-profile, dog-appropriate RuffLand configuration is worth comparing with a suitably sized Gunner G1. The correct choice is the one that fits with the hatch closed and can be secured properly; a model-name match is not proof.
RuffLand single-door kennel
Compare the full upper profile against the Model Y’s closed rear glass while preserving access to supplies you need outside the underfloor compartments.
When we would pass: Reject this layout if exact generation and seating layout cannot accommodate the dog-appropriate shell and a usable entrance.
Check this option and its instructions →
Gunner G1
Use a full-height G1 model beneath the closed liftgate and plan access to charging or roadside supplies before the enclosure covers the floor panel.
When we would pass: The deciding trial includes flat load surface without counting storage wells. A floor-only fit does not resolve that constraint.
Check this option and its instructions →
These are candidates to investigate, not confirmed fits. Match the exact size and installation instructions to your dog and vehicle before ordering.
Before you order
Use the main guide’s dog-sizing and loading-route checklist to test your chosen layout. Review how to check crash-test evidence for the exact product and installation; a successful physical fit does not establish crash protection.
Bring your dog’s measurements, your model year and trim, and photos of the intended installation area to the kennel seller. Ask for the exterior envelope and usable interior measurements of the exact size and door configuration. Confirm the return terms before a trial fit.
Sources and related guides
Reviewed October 26, 2026. Recommendations are editorial judgments from published information; no vehicle-specific fit or crash result is implied.